Automatic CNC pipe end forming machines are used to make the steel pipe bend to meet the practical needs, which can meet the needs of use. However, in the normal design of automatic cnc pipe end forming machines, it is still necessary to pay attention to some problems, otherwise it may affect the later use and the production period.

First, is the automatic cnc pipe end forming machines hydraulic system leakage causes, divided into internal leakage and external leakage. According to the manufacturer of the automatic hydraulic pipe cutting machine, internal leakage refers to the internal gap of the parts, wear and other reasons, a small amount of oil flows from the high pressure chamber to the low pressure chamber. External leakage is oil leaking from the inside of a component or pipe joint. Internal leakage will cause system pressure, and when the flow rate is unstable, there will be downtime.

However, the cause of leakage of hydraulic system is complex, mainly related to vibration, pressure difference, manufacturing error, assembly gap and so on. automatic cnc pipe end forming machines Hydraulic system leakage, what measures can be stopped to make up? Mechanical experts said that automatic cnc pipe end forming machines hydraulic system leakage, can reduce the number of tubing joints, through the control valve integration way to avoid system oil leakage; In order to reduce the hydraulic shock and mechanical vibration during commutation, the commutation time should be prolonged as much as possible. automatic cnc pipe end forming machines require regular inspection, regular maintenance and timely treatment to avoid leaks.

However, the reasons for information leakage of automatic cnc pipe end forming machines are complicated, mainly related to vibration, pressure difference, manufacturing level error, assembly gap and so on. So, automatic cnc pipe end forming machines when the hydraulic system structure leaks, what important measures can be taken to stop making up? Mechanical design experts said that automatic cnc pipe end forming machines hydraulic system oil leakage, can reduce the number of tubing joints, the use of control valve integrated management, to avoid network system oil leakage; In order to reduce the hydraulic shock and mechanical equipment vibration during the reversing process, we should extend the reversing time as much as possible; Regular inspection, maintenance and timely resolution should be organized to prevent leakage.

In addition, the hydraulic system sometimes appears heating phenomenon when working, the internal cause is unreasonable system design, such as unreasonable component matching, too thin pipelines, many elbows, small bending radius, and insufficient fuel tank volume.

automatic cnc pipe end forming machines https://www.john-sheng.com/CNC-Tube-End-forming