Do you have stunning high ceilings but struggle with changing a recessed light bulb when it stops working? Well, fear not! In this article, we will walk you through a step-by-step guide on how to change a recessed light bulb in a high ceiling.

Quick Links

Before we dive into the details, let's address the first question: Can you see the outer edges of your recessed light bulb inside the housing? If you can, you can remove the bulb by hand. If not, we will show you how to use duct tape for removal.

Read more: Do LED Lights Damage Walls?

Removing your recessed light bulb by hand

  1. Let the lights cool: If the recessed light bulb is still working, turn it off and let it cool down for a few minutes. This step is important even if you are using LED lights.

  2. Position your ladder: Place a tall and sturdy ladder underneath the bulb. Avoid precarious setups or makeshift ladders by stacking objects. Safety should always be a priority.

  3. Rotate the bulb counterclockwise: Reach up and gently twist the bulb counterclockwise until it unscrews completely from the socket. If it feels a bit resistant, it could be due to the springs holding it in place.

Removing your recessed light bulb using duct tape

If you cannot see the edges of the bulb, don't worry! Duct tape can come to the rescue.

  1. Prepare the duct tape: Tear off a 6-12-inch strip of duct tape with the adhesive side facing outward.

  2. Attach the duct tape to the bulb: Affix the middle of the tape to the bulb's surface, ensuring it covers most of the bulb. Press it down firmly for a strong adhesion.

  3. Twist counterclockwise to remove: Grab both ends of the duct tape and start twisting counterclockwise. The bulb will gradually loosen and can be removed.

Read more: Essential Pool Lights Info: Transforming Your Poolside Bliss

Installing your new recessed light bulb

Now that you have successfully removed the old bulb, it's time to install the new one.

  1. Prepare your new bulb: If you already have a replacement bulb, skip to the next step. Otherwise, take the old bulb to your local hardware store for assistance in finding the appropriate replacement.

  2. Install the new bulb: Ascend the ladder again and gently insert the new bulb into the socket. If you removed the old bulb by hand, simply insert the new one in the same manner. If you used duct tape, repeat the process by sticking the tape to the center of the bulb and twisting it clockwise into place.

Changing a recessed light bulb in a high ceiling can be straightforward. With a bit of knowledge and our top tips, you'll have your new bulb installed in no time!

Read more: What are some common maintenance tips to ensure the longevity of above ground pool lights?

Frequently Asked Questions

Q: What should I do if my recessed light bulb is still not working after replacement?
A: If the bulb is not the issue, it could be a problem with the socket or wiring. It's best to consult a professional electrician to diagnose and resolve the problem.

Q: How often should I change my recessed light bulbs?
A: The lifespan of a bulb depends on its type and usage. On average, incandescent bulbs last around 1,000 hours, while LED bulbs can last up to 25,000 hours or more.

Q: Can I use any type of bulb for my recessed light housing?
A: It's essential to use bulbs recommended for recessed lights to ensure proper fit, heat dissipation, and safety. Consult the manufacturer's guidelines or seek advice from a lighting professional.

Q: Are recessed lights energy-efficient?
A: Yes! LED recessed lights are highly energy-efficient and can significantly reduce electricity consumption compared to traditional incandescent or fluorescent bulbs.

As an Amazon Associate, I earn from qualifying purchases.