The car locator device is very useful, especially for the auto finance risk control industry, I believe many people have known it. But some people still ask: Is it possible to install the locator on the car and start using it immediately?
If you do, you'll find that it doesn't work. In fact, after a car has a GPS tracker installed, the most important step is to activate it. For many newbies, they don't know how to activate the car GPS tracker. Then let's talk about how the general GPS locator is activated:
First of all, we all know that GPS positioning terminals are mainly divided into wired GPS locators, wireless GPS locators and OBD interface locators. The installation of the wireless GPS locator is relatively simple. Just find a place in the car to hide the device, but pay attention to the side with the antenna facing up.
The installation methods of the wired and wireless trackers are slightly different. The wired tracker needs to be connected to the vehicle power supply, so that it can work continuously for 24 hours without power failure. The wireless locator, generally fully charged once, can determine the standby and use days according to the battery size of the locator.
After the device is installed, the next step is to install the "card" on the device. The function of the card is to provide network transmission for the device, so that the device can transmit information to the management background.
Whether it is a wired locator or a wireless locator, the steps for installing a SIM card are generally as follows:
①Open the back cover of the locator or the plug of the SIM card slot of the locator; ②The card will be installed and inserted correctly according to the picture of the card inserted on the locator; ③Close the back cover or the plug of the card slot.
After the SIM card is installed, power on the locator, and connect the locator to find the positive and negative poles of the car power supply. The negative pole is very easy to find. The place where the body is grounded is the negative pole. The positive pole is found in the fuse box, near the key switch of the car, or directly connected to the battery. Of course, if you don't understand, you can also ask professional technicians to install it.
However, it is best to connect to the normal power supply, which is not affected by the key switch of the car, and the power cord directly drawn from the car battery; the side of the locator with the light should face the sky, and the side facing the sky should not be close to the metal object to block the internal GPS antenna , it also receives signals from 20,000 kilometers away.
To sum up, the activation method of the GPS tracker is divided into three steps: 1. Install the SIM card; 2. Turn on the power of the tracker and turn on the switch; 3. Take the vehicle or tracker outdoors for a period of time, and the tracker can be used Activate use.
car locator device https://www.eelinktracker.com/GPS-Tracker-for-Car/