Do LED lights use a lot of electricity? >>> See More The Bright Side of Savings: LED Lights and Energy Efficiency at https://www.pinterest.com/pin/934496991409670526/ Are you tired of skyrocketing energy bills and looking for ways to cut down on your electricity consumption? LED lights have become a popular choice for households and businesses, thanks to their energy efficiency and longevity. Gone are the days when we had no choice but to pay for hefty electricity bills, no thanks to halogens and light bulbs known for consuming a lot of energy. But, do LED lights use a lot of electricity? In this blog post, we will delve into the world of LEDs and discover how much energy they really consume compared to traditional incandescent bulbs. So, sit back and let's shed some light on this commonly asked question! So, how do LED strip lights compare to traditional incandescent bulbs when it comes to power consumption? Let's take a look at a typical 60-watt incandescent bulb and compare it to an equivalent LED strip light. A 60-watt incandescent bulb consumes 60 watts of electricity per hour. If left on for 10 hours, it would consume 600 watt-hours (Wh) of electricity. On the other hand, an equivalent LED strip only consumes around 9-12 watts per hour, depending on its brightness. This means that if left on for 10 hours, an LED strip would consume only 90-120 watt-hours of electricity, versus the 600 watt-hours from the incandescent bulb. Energy Efficiency of LED Lights One of the main reasons why LED lights use less electricity than incandescent bulbs is their energy efficiency. LED lights are much more efficient at converting electrical energy into light than incandescent bulbs. In fact, LED lights are up to 80% more efficient than traditional bulbs. This is because LED lights produce light through a process called electroluminescence, which involves the emission of light from a semiconductor material when an electric current is passed through it, simply put, LEDs are instant-on. This process is much more efficient than the process used in incandescent bulbs, which involves heating a filament to produce light. As a result, LED lights produce much less heat, and most of the energy they consume is converted into light. >>> See More Do Any Smart Bulbs Work With 5GHz WiFi at https://bestledlightstripsblls.blogspot.com/2023/04/do-any-smart-bulbs-work-with-5ghz-wifi.html Factors that Affect LED Power Consumption While LED lights are generally more energy-efficient than traditional bulbs, there are some factors that can affect their power consumption. These include: Brightness: The brighter the LED light, the more electricity it will consume. However, even the brightest LED lights consume significantly less electricity than their incandescent counterparts. There are several types of LED strips that impact brightness. 12V and 24V Rated LED strips, the later being brighter due to higher voltage rating Standard vs High Density LED Strips, the higher density being brighter since the LEDs here are more compact. COB lights, this LED is bright and compact but are still more energy efficient than traditional lighting systems. Color temperature: LED lights come in a variety of color temperatures, ranging from warm white to cool white. The color temperature can affect the power consumption of the LED light, with warmer temperatures generally consuming less electricity than cooler temperatures. This may be true with other manufacturers. With Hitlights this depends on the type of LED used, if the LED strip is standard density power consumption will be the same across the different color temperature, the same goes with high-density strips, however, this may be true with other manufacturers. Usage time: The longer an LED light is used, the more electricity it will consume. However, as we saw earlier, even when left on for extended periods of time, LED lights consume significantly less electricity than traditional bulbs. How to Choose Energy-Efficient LED Lights Look for high-quality LED lights: High-quality LED lights are more energy-efficient and last longer than cheaper, low-quality alternatives. Look for LED lights that are UL listed, which means they have been tested and certified to meet safety and quality standards. Choose the right brightness level: Select an LED light with a brightness level that meets your needs without being excessively bright. This will help reduce power consumption and ensure that you're not wasting energy. Go with standard density if your aim is to get subtle lighting Your perfect fit for high density LED strips will be general to task lighting applications Consider color temperature: If you're looking to save energy, choose an LED light with a warmer color temperature, as these tend to consume less electricity than cooler temperatures. >>> See More Can Smart Bulbs Work Without WiFi at https://hub.docker.com/r/bestledlightstripsblls/can_smart_bulbs_work_without_wifi

How to check for LED strip quality >>> See More Unveiling the Magic: The Science Behind LED Lights at https://www.pinterest.com/pin/934496991417468225/ LED strips are such fascinating pieces of lighting technology, but they have a bad reputation because of cheap variants clogging the marketplace. Luckily, there are ways to distinguish high-quality LED strips from the ones that will break down within months. In this blog post we’ll do our best to show you what to look for when picking out LED strips. If the product mentions no technical specifications at all, that’s one of the biggest warning signs. Low cost LED strips claim to have high brightness are also a red flag, because they may overdrive the LEDS to the point of premature failure. Look for these specifications LED strips should at least offer you information on the following: the number of LEDS per meter, the brightness per LED emitter and the power draw per meter. These numbers will tell you a lot about the overall quality and brightness of the strips on offer. LED density The number of LEDs per meter is sometimes referred to as LED density. This specification will give you an idea of the distance between the LEDs that are present on a strip. This in turn will tell you whether there will be visible hotspots and dark spots between the LED emitters. Ideally, you want at least 30 LEDs per meter, going up to 120 for the most evenly distributed lighting. Always look out for information about the LED density, because the LED emitters are the most expensive component of the strip and probably the first thing where manufacturers will try to save costs. Power draw per meter The next step is to check the power draw per meter. With this number, you can calculate the amount of electricity that is necessary to power the complete strip. A decent quality LED strip should be capable of providing at least 10 watts per meter. You can also use the power draw per meter to see if the LED emitters on a strip are being overdriven. Divide the wattage per meter by the LED density per meter and the outcome of that simple calculation will tell you the wattage per LED. It’s usually a good sign if the LEDs are not driven at more than 0.2 watts per emitter. >>> See More How to Illuminate Corners with LED Strip Lights at https://band.us/band/90424574/post/30 LED brightness The brightness of a LED strip is also usually measured per meter. A good quality LED strip should at least provide 420 to 1500 lumens per meter. This level is approximately equal to the light output of conventional lamps. The wattage rating of a LED strip is not enough to determine the actual light output, because the strips can have different levels of efficiency. Power requirements In summary: check for all the specifications mentioned above and see if the product meets or exceeds the minimal requirements. If so, all you need to worry about is having enough electricity to power the LED strips. Professional strips are configured to operate at 24V DC, so if you’re running them off a standard power source, for example a wall outlet, you need a power converter for the lower 24V voltage. Also make sure that your power supply has enough capacity to power the strips. You can determine the total power draw by multiplying the LED power draw per meter by the length of the strip in meters. >>> See More Can I add a dimmer to control the brightness of LED strip lights on my RV awning at https://twitback.com/post/437085

Adding LED Lights Around Your TV? What You Need to Know >>> See More Review Best Outdoor Waterproof LED Strip Lights: Generic LED Light at https://www.flickr.com/photos/bestledlightstripsblls/53261565347 Are you looking to add a unique lighting system to your home? Upgrade any room instantly by adding LED strip lights around your TV. This creative and practical choice not only enhances the appearance of your space but also creates a more immersive experience while watching TV. Why Should You Add LED Lights Around Your TV? There are several reasons why LED lights around your TV are a fantastic choice. Firstly, backlighting your TV upgrades the appearance of the room, making it more comfortable and aesthetically pleasing. Additionally, LED lights can create a more immersive experience by altering the mood of the room. Imagine the feeling of being in a cinema while in the comfort of your own home. With RGB LED lights, you can get creative with different settings. For instance, if you're watching a movie set in water or the ocean, using blue or green light can take the experience to the next level. LED lights also enhance gaming experiences, making them more exciting. LED lights can also benefit those who experience eye strain or headaches when watching TV in the dark. The contrast between the brightness of the TV and the darkness of the room can be harsh on the eyes. LED lights help even out the light in the room, allowing your eyes to adjust more comfortably. >>> See More Can You Cut LED Strip Lights To Length at https://band.us/band/90424574/post/6 How to Install LED Lights Around Your TV Installing LED lights around your TV is a quick and straightforward process. Here's what you need to do: Check the manufacturer's guide for any specific installation instructions. Clean the back of your TV, ensuring that it's free from dust. This will help the tape stick properly. Decide where you want to place the LED lights and attach the tape. Then, position the LED strip on top of the tape. Plug in the USB cable into the LEDs, and you're ready to enjoy the lighting. What to Consider When Buying LED TV Lights There are a few factors to consider when purchasing LED lights for your TV: Control Options: Determine how you want to control the lights. Some options include wireless remote control, app control, or using a switch. Size of LED Strips: Choose the right size of LED strips based on the dimensions of your TV and your desired lighting arrangement. Decide whether you want the strips to cover all four sides or just the left and right sides of the TV. Color Options: Consider the color of the LED strip. You can choose between various shades of white, such as cool or warm white, or opt for RGB lights to enjoy a wider range of colors. Upgrade your TV viewing experience and add a touch of elegance to your home by incorporating LED strip lights around your TV. Let the lights enhance your space and create a truly immersive atmosphere. >>> See More Review about 12v Led Strip Lights: Aclorol Neon RGB LED Strip at https://gettr.com/post/p2mwhrk49dd

Looking for pool parts? >>> See More Top 5 Best LED Kitchen Strip Lights Under Cabinet at https://www.deviantart.com/ledlightsblls/status-update/Top-5-Best-LED-Kitchen-986637735 Swimming pool lights are not just functional, they create an atmosphere that sets the mood for your pool setting. If you want to make a splash and impress your guests, choosing the right pool lighting is essential. At our pool parts store, we understand the importance of finding replacement lights that suit your needs. One of the most common concerns pool owners have is how to control their pool lights. After all, what good is a light if you can't control it? Let's explore the different ways you can take control of your pool lights. Why Pool Lights Matter Pool lights are a must-have feature for any pool owner. Not only do they allow you to enjoy your pool day and night, but they also provide added security. Swimming at night without pool lighting is not the same, and having extra visibility at the deeper end of the pool gives peace of mind to parents and chaperones. Simple Control: On and Off Controlling your pool lights is as easy as flipping a switch. Most pool lights come with a traditional ON/OFF switch that you can use to turn the lights on or off. However, finding the correct switch can sometimes be a challenge. It may require a bit of investigation, but once you locate the right switch, controlling your pool light is a piece of cake. Changing Colors and Light Shows If you have a colored pool light, you have the option to switch between different colors and light shows. Changing the color of your pool light is similar to turning it on or off. Flipping the switch once turns the light on, and turning it off and on again will cycle through the available colors and light shows. Keep repeating this procedure until you find your desired setting. >>> See More Where Can You Cut Led Strip Lights? How to Cut It at https://glose.com/activity/64c2233a7c10adedb8d052b8 Take Control with Automation Systems For ultimate convenience, an automation system is the way to go. With a pool automation system, you can control not only your pool lights but also other pool equipment like pumps, heaters, and sanitization systems. Although automation systems can be costly, they provide a centralized control panel or remote control for all your pool needs. If you want full control over your pool equipment, including your pool lights, investing in an automation system is worth the extra cost. The Affordable Alternative: LED Pool Bulbs For those who want to control their pool lights without the expense of an automation system, LED pool bulbs are a great option. The PureLine Pure Colors LED bulbs offer a cost-effective solution for pool owners who only want to control their pool lights. These bulbs eliminate the need for an entire automation system and can easily be installed in your existing light fixture. >>> See More Why put LED lights behind the TV at https://techhub.social/@bestledlightstripsblls/111191403115664489

Why Your LED Lights Are Different Colors | How To Fix Them I recently purchased some LED light strips, and while they looked cool, I soon noticed that the color was inconsistent throughout the strip. It turns out that LED lights can encounter issues just like any other electrical device. So, I decided to delve deeper into why LED lights can have different colors and how you can fix them. >>> See more How to Install Offroad Lights on Your Vehicle at: https://ledlightsblls.blogspot.com/2023/03/how-to-install-offroad-lights-on-your.html Why Are Your LED Lights Different Colors? Your LED lights might be different colors due to overheating or low-quality lights. LED lights draw a lot of power, which can cause them to heat up if not managed properly. Proper heat dissipation is crucial for LED lights to maintain consistent color. High-quality LED strips often come with adhesive tape that provides cooling properties. Additionally, the aluminum casing within the strip acts as a heat sink. Investing in quality LED lights can ensure longer lifespan and better color consistency. Low-Quality LED's Not Color-Matched Low-cost LED lights are more likely to have color issues. Over time, the epoxy coating on these lights can deteriorate due to heat and UV radiation, causing the color to change. Investing in LED light strips from reputable brands is recommended to avoid these issues. Paint or Adhesive on LED During room renovations, it's common for LED strips to get contaminated with paint or other materials, resulting in dull, faded, or different colored lights. It's important to keep the LED lights clean and remove them if necessary to avoid damage to the wiring. LED Strips Are Overheating Proper installation is crucial for LED light strips. It's important to mount them on surfaces with good air ventilation, such as underneath kitchen cabinets or on metallic or ceramic surfaces. Avoid mounting them in tight or heated spaces, as wood surfaces can retain heat and cause the LED lights to overheat. Voltage Drop >>> See more Can You Cut LED Light Strips? at: https://www.flickr.com/photos/bestledlightstripsblls/52746536340 A voltage drop can occur due to a poor connection or a poorly made LED strip. This can result in different colors or uneven lighting. To fix this issue, consider supplying power from both ends of the strip and check for any damaged or broken connections. How To Fix LED Lights That Are Different Colors If you notice that sections of your LED lights are different colors, try supplying power from both ends of the strip and check for any damaged connections. If the LED strip is damaged, you can troubleshoot and repair or replace the damaged section. It's always best to consult with your supplier for replacements or follow the appropriate steps for soldering or using connector clips. Why Do LED Strip Lights Blink? If your LED lights are blinking or flickering, there could be a few reasons behind it. First, check for loose connections or a power supply that may not be strong enough. Poor connections can also cause constant blinking or flashing, so ensure that all parts are properly connected. Additionally, allowing your LED lights to cool down after prolonged use can prevent blinking. Finally, make sure to keep your LED lights away from water and regularly clean them to avoid any damage. Verdict: Why LED Lights Are Different Colors LED lights can have different colors due to overheating, low-quality lights, power issues, or external factors like dust or paint. By ensuring proper installation, using high-quality products, and maintaining your LED lights, you can prevent and fix color issues. If you have further questions or need assistance, it's best to consult with a professional. FAQ: Fix Different Color LED Lights If your LED strips are displaying the wrong color, check the markings and terminals to ensure they are correct. Disruptions between the circuit board and the lights can cause color issues when using a remote control. Damage to the lights or insufficient power can also cause different colors, so check the wiring and troubleshoot to identify any issues. Remember, prevention and maintenance are key to avoiding problems with LED lights. Follow the steps provided in this guide to ensure your LED lights last and maintain consistent color. >>> See more How Are LED Strip Lights Used After Being Cut? at: https://www.linkedin.com/posts/bestledlightstripsblls_how-are-led-strip-lights-used-after-being-activity-7042399506906181632-bDvx/

Cutting, connecting and installing LED strips >>> See More Beyond Bulbs: The Versatility of LED Lights Solutions at https://www.pinterest.com/pin/934496991417490839/ This article will tell you exactly how to cut, connect and install LED strips so that you can start using LED strips today. Click on one of the links below to jump to that section: Cutting LED strips Connecting LED strips Installing LED strips Frequently asked questions Cutting LED strips LED strips can be cut so that they fit perfectly for whatever use you have in mind. Cutting the strips is fairly easy, but it is important that you know how to go about doing this. Cutting your strips incorrectly could damage the LED strip or cause injury. Where can you cut LED strips? You cannot cut just anywhere on your LED strip. Instead, you must follow the guides located on the strips that will tell you where you can cut them. The LED strips should have copper dots or ovals, typically located every three LEDs. These markers indicate cut points where you can make a cut in the strip. Make sure that you only cut on these markers and use a sharp cutting tool such as a pair of wire cutters or utility knife, to achieve a clean finish and prevent any damage to the internal wires. You should also make sure the strip is disconnected from the power source and laid flat on an even surface before cutting. How to close the exposed circuit To close off the exposed circuit, you will need some good quality electrical tape. Tape is the easiest way to fit an exposed circuit, as you can simply wrap the tape over the end of the wire to prevent the electrical current from from short circuiting or causing injury to anyone. You should wrap the tape around each exposed end several times to ensure that the circuit is properly closed off. >>> See More How to Brighten Your Kitchen with Under Cabinet Lighting at https://glose.com/activity/65869ada888a9b4f146c70ff Connecting LED strips To use your LED lighting, you will need to connect your strips to a power supply. You may also need to connect two LED strips together to create a longer strip. This can be done fairly easily and is a great way to use pieces of a strip that have been previously cut off. How do you connect two LED strips together? Two LED strips can be connected together by using strip connectors. There are two types of connectors; clip-on and fold over. The connector that you choose to use will depend on the type of strip lights that you are connecting. After choosing the correct connector, you should slowly slide the end of your LED strip into the connector; do this carefully to avoid any damage to the lights. Connectors can be used to join two strips together, to expand the length of LED strips or to bypass any obstacles (such as heating pipes) that may get in the way of the LED strip. LED strips can also be connected with a soldering iron. This process involves heat which is used to melt copper wires into each other so that they are attached. After soldering the wires together, you should always cover up the exposed wire with tape so that it is safe to use. How many LED strips can you connect together? The number of LED strips that you can connect together will ultimately depend on the specifications of the strips that you are using. You will need to make sure that the strips you are connecting have the same specifications and that your power supply can handle being connected to multiple strips. Many strips from WeLoveLEDs can be powered in one continuous length up to five metres with power from just one end. How to connect LED strip lights to one power supply For ease of use, LED strips can be connected to one power supply. This will require some simple wiring and you will need to purchase a connector wire with a clip that can hold the LED strip. To connect your LED strip to a power supply, you need to first insert the strip into the clip on the connector wire. Match the '+' sign on the tape with the red wire and the '-' sign with the black wire and then firmly press to close the clasp. You may have to remove some adhesive backing on the strip to do this step. The connector wire can then be plugged into your power supply. For optimal power, you could consider purchasing an LED transformer; this is a power adapter with a higher output wattage that can effectively power larger lighting systems. Installing LED strips Before installing your LED lighting, you will need to consider your power supply, the contours of the wall or surface and the proximity to the power supply. Understanding this before installing the lights will help you to tackle any problems before the LEDs are attached to the wall. It is also worth considering whether you will need to adjust the brightness of your lights. If so, you may need to invest in an LED dimmer >>> See More Deciphering LED Strip Brightness at https://techhub.social/@bestledlightstripsblls/111628713733163266

How to Convert Recessed Lights to LED Are you looking to improve the lighting in your home? One of the best ways to achieve a fresh, modern look is by converting your old incandescent recessed lights to LED. Not only will you enjoy significant energy savings, but LED lights also have an exceptionally long lifespan. If you're ready to make the switch, follow these simple steps to upgrade your lighting to LED. >>> See more Step By Step Guide How to Fix a LED Light Strip at: https://band.us/band/90424574/post/19 Are Your Recessed Lights Compatible with LED? Before purchasing LED retrofit kits, it's important to determine if your existing recessed lights can be converted to LED. The most common issue lies with the mounting springs used to attach the LED to the housing inside the ceiling. LED recessed lights typically use "v" shaped torsion springs, which slide between brackets. If your current trims utilize a different mounting method, they may not be compatible with LED retrofit kits. Not to worry, though! If your recessed lights aren't compatible, you can still convert them by replacing the fixture with a universal type. To check if your lights can be converted, follow these steps: Stand on a ladder and remove the light bulb from one of your recessed lights. Use your fingertips to pull down on the trim and observe how it is attached. If it uses the "v" shaped torsion springs, you're good to go! If not, remove the trim to inspect the housing. Look for brackets attached on opposite sides. If they're present, you're in luck! If not, consider replacing the fixture with a universal type. Four Simple Steps to Convert Recessed Lights to LED >>> See more Responsive LED Light Remote at: https://hub.docker.com/r/bestledlightstripsblls/why-led-strip-lights-remove-not-working Now that you know your recessed lights can be converted, it's time to proceed with the upgrade. Follow these four steps to convert your recessed lights to LED: Remove the existing trims. Carefully take off the old trims by following the manufacturer's instructions. Adjust or remove the lampholder. If your recessed lights use a lampholder, either adjust it to the highest position or remove it to create space for the LED unit. Screw in the adapter and install the LED unit. Attach the adapter to the light bulb socket and plug in the LED unit. Insert the torsion springs and secure the LED unit. Squeeze and insert the torsion springs into the brackets inside the housing. Push the LED unit up into place against the ceiling. That's it! Once you've completed these steps, turn on your new LED recessed lights and enjoy the upgraded lighting in your home. Frequently Asked Questions Q: Can I convert any recessed light to LED? A: While most recessed lights can be converted to LED, it's essential to check if your existing trims use the compatible mounting method of "v" shaped torsion springs. Q: Which companies offer reliable LED retrofit kits? A: To ensure quality and reliability, stick with well-known brands like Cree or Halo that provide at least a 5-year warranty. Q: Do I need professional help to convert my recessed lights to LED? A: Converting recessed lights to LED is a relatively straightforward process that can be done by most homeowners. However, if you're unsure or uncomfortable with electrical work, it's always best to consult a professional. Upgrade your lighting to LED and enjoy the benefits of energy efficiency, longevity, and a modern aesthetic. Follow these steps, and you'll be on your way to a brighter, more sustainable home. >>> See more LED Lights: A Sustainable Lighting Solution for the Future at: https://www.pinterest.com/pin/934496991413980233/

Are More Expensive LED's Really Worth It? >>> See More How do I install LED strip lights at https://det.social/@bestledlightstripsblls/111430999109090723 LED, or light emitting diode, bulbs have definite advantages over CFL, HID and incandescent bulbs. However, within the LED industry, prices vary greatly from one bulb to another. Are the pricier LED's worth the increased initial investment? The short answer is yes. As with many products, you get what you pay for when it comes to LED lighting. The difference in quality can be quite noticeable. An initial investment for high quality LED lights can actually cost less in the long run when you factor in maintenance, light quality and energy savings. Let's look at a few of the things to consider when comparing LED lighting. Heat Management System Contrary to what many believe, LED's do emit heat and how that heat is managed impacts the life of the components, as well as the brightness generated by the LED. LED's have a 'heat sink' and housing that help to dissipate heat. The style of heat sink can vary greatly from LED to LED, and some are better than others. Be sure to check the lifespan of the LED, for example, LED lights from Atlas can achieve 200,000+ hours , or 22.8 years. Many cheaper bulbs achieve 50,000 hours, or 5.7 years. That means you'll buy 4 "cheap" bulbs for every one quality bulb. LED Chips Chips are the component that actually generates the light in an LED bulb. Chip quality is what determines light color and light output, so high quality chips are of the utmost importance to the quality of light. The price of LED chips on the market varies greatly, but reputable LED manufacturers will only use the best quality chips. Power Management Systems Power management systems are similar to ballasts, in that they convert the current and voltage from the socket to the chip. If the power management system is poor, the light could under-perform, or even fail if it the chip is overpowered. >>> See More Illuminate Your Boat: A Guide to Installing LED Strip Lights at https://bestledlightstripsblls.blogspot.com/2023/11/illuminate-your-boat-guide-to.html Lens LEDs are “directional," meaning they emit light in a specific direction, which is different than incandescent bulbs. The lens in an LED bulb directs the light to the desired area, and will determine how well light is dispersed from the LED to the area being lit. A high quality lens will disperse light more effectively and efficiently. Lumens per Watt All of the above components will determine how many lumens per watt can be generated by the LED light. Lumens are the units used to measure the brightness of a bulb. The more lumens per watt, the more light is generated per energy used. Look for a high number of lumens per watt to get the most energy savings. Correlated Color Temperature (CCT) There are a wide range of color temperatures in the LED industry. Color temperatures of 4200K - 4600K are the whitest light in the light color spectrum and most natural to the human eye. The higher the number, the warmer the light. If you want to avoid green or blue hues associated with some LED's, be sure to choose from the higher end of the spectrum. Warranties Reputable LED manufactures will generally offer some type of warranty on their products. Look for a company that stands behind their products and is easy to work with should you ever need to use the warranty. Yes, they really ARE worth it. As you can see, there are many factors that make up the quality of LED lights, and can impact both the short and long term costs. A higher initial investment for quality LED's can save actually save more in the long run that using so-called "cheap" LED's. >>> See More Where can LED strip lights be used at https://mastodon.world/@bestledlightstripsblls/111430992882187684

Do LED Lights Attract Bugs? >>> See More Can I use third-party apps to control my smart LED strip lights at https://mastodon.world/@bestledlightstripsblls/111579174010097580 Why Are Bugs Attracted To Light? Most bugs have unique eyes, which they use to keep track of moonlight. Keeping the moonlight at a specific angle, bugs find their way to travel. Since we as humans have placed LED lights everywhere, in our homes, in the streets, etc, for our convenience, it somehow disturbs the travelling pattern for the insects. When the light from the lamps reach the sight of bugs, they often get confused and mistakenly think of the artificial light as moonlight. That’s just one reason for the bugs to be attracted towards the lights, there’s more! Another reason for bugs to keep buzzing around the lights is because of the heat. Generally, light bulbs do emit a slight amount of radiation and heat, which makes the bugs feel comfortable in cold weather conditions. Moreover, scientists do claim that a few kinds of flowers reflect ultraviolet rays. Since the artificial lights also emit some ultraviolet rays, bugs might mistakenly think of the light as flowers. There’s not one single reason why bugs like to buzz around the lights, so what colour of lights should you use to keep the insects away? Let’s find out. What Light Color Spectrum Attracts Insects? The people at PARS did an experiment by dividing a farm into several sections and installing different coloured lights in each of them. Later on, most of the bugs around the lights were captured for counting to find out which colour spectrum attracts the most insects. And, the results are pretty good. After the experiment, it was found that the insects are more attracted to Black (ultraviolet) light. After that, the most number of insects were captured around the Blue lights, followed up by White, Yellow, Green and Red. So, it basically means that lights of cool colour temperatures attract more insects than hot temperature colours. However, we cannot just install a red colour light in our living room to keep the bugs away, yellow is quite a good choice to go with. Otherwise, you can stick to the white lights as well. >>> See More Where to Place LED Lights in Your Dorm Room at https://glose.com/activity/657b0fdcbce914d424acc74a Blue Lights and Mosquitoes As we discussed in the above section, blue is one of the most favourite colours of bugs. That said, we can conclude that mosquitoes, like any other bug, will also show similar behaviour. But, there’s a catch. Although bugs like the blue light and white light, as you can see it by yourself around the street lights. If you go around the same lamp in the morning, you will find many of the insects dead there only. So, even after the conditions were favourable for the insects, what makes them die eventually? Oftentimes, we see mosquito killer machines installed in places like restaurants, schools, etc. Such machines use light rods that emit blue light rays to attract the mosquitoes towards them. As soon as the mosquito comes in contact with the machine’s grill, it gives an electrical shock to the mosquito. So, it is pretty clear that mosquitoes like the blue light spectrum. What about the mosquitoes and bugs around the street lamps? Although the blue light attracts the bugs, the over-exposure to such a light spectrum destroys the cells present in an insect’s body, making them weak from inside. Whatever the blue light does to the insects, it’s not a practical choice to install blue light in our homes as it’s quite harmful to us, humans as well. What About Yellow Light? We often see lights marketed as bug repellent lights, which is wrong and misleading. There’s no such light spectrum that can make the bugs go away, or kill them. The yellow spectrum of light is not the most attractive colour in an insect’s eyes. That’s the reason we don’t see a large group of bugs around them, but that does not make them bug repellent to be precise. It’s just that yellow lights attract fewer bugs than other lights such as black and blue. So, if you are looking for the right light colour for your home, yellow lighting is still a far better option than white or blue, if you seriously hate bugs! Warmer colours like yellow are even comfortable for human eyes, so this is a good colour choice. >>> See More The Ultimate Guide To Addressable LED Strips: Revolutionize Your Lighting at https://www.linkedin.com/posts/bestledlightstripsblls_the-ultimate-guide-to-addressable-led-strips-activity-7141088625294819330-H4C2

How Many Lumens Do You Need for Outdoor Lighting? The future of outdoor lighting is bright, thanks to the advancements in LED technology. LED lights are not only energy-efficient but also offer a wide range of brightness options. When it comes to illuminating your outdoor space, it's important to consider lumens, the measurement of visible light. In this article, we will explore the importance of lumens, how they compare to watts, and provide recommendations for outdoor LED lighting. >>> See more Step By Step Guide How to Fix a LED Light Strip at: https://band.us/band/90424574/post/19 What is a Lumen? A lumen is a unit of measurement that determines the brightness of a light source. When shopping for LED light bulbs, paying attention to lumens is crucial. The more lumens a bulb has, the brighter it will be. So, if you're looking for highly bright floodlights, choose the ones with the highest lumens. How Do Lumens Compare to Watts? Watts and lumens measure different aspects of light. Watts indicate the amount of electrical power a bulb consumes, while lumens measure the actual brightness regardless of power consumption. In the past, people used to associate higher wattage with brighter light. However, with modern lighting technology, it is no longer the case. Today, you can achieve the same brightness with significantly less energy. For example, a 23-watt LED bulb can produce the same amount of light as a 100-watt incandescent bulb. Finding the Right Lumens for Outdoor Lighting Whether you want to save money on electricity bills or contribute to a greener environment, LED lights are the perfect choice for outdoor lighting. Here's a cheat sheet to help you determine the average lumens needed for different outdoor LED lighting: Security Lights: 700-1400 lumens Decorative Wall Lights: 50-150 lumens Decorative Post Lights: 100-400 lumens Pedestrian Post Lights: 500-2000 lumens Landscape, Garden, and Pathway Lights: 50-250 lumens Deck, Fence, and Pergola Lights: 5-250 lumens >>> See more Responsive LED Light Remote at: https://hub.docker.com/r/bestledlightstripsblls/why-led-strip-lights-remove-not-working Frequently Asked Questions Q: How many lumens are needed for outdoor pathway lighting? A: For most walkways, 80 lumens is considered bright enough, even for commercial properties. If you're using garden lights for accent lighting, 50 lumens would generally suffice to add safety, dimension, and interest to your yard. Q: How many lumens are needed for landscape lights? A: Landscape spotlights, used for accent lighting on shrubs, signs, and architecture, typically range from 100 to 300 lumens. Solar-powered LED spotlights offer excellent clarity, duration, and brightness. Q: Why should I choose solar-powered outdoor LED lights? A: Solar-powered outdoor LED lights are a great choice for several reasons. They are easy to install without the need for complicated wiring or hiring an electrician. They are also energy-efficient, saving you money on electricity bills. Furthermore, they are improving in quality and durability, providing clear and attractive lighting for your outdoor space. As you become familiar with lumens, you can make better-informed decisions about the right outdoor lighting options for your home and yard. So, go ahead and decorate your outdoor space with solar lamp posts, post lights, pathway lights, and more to create a beautifully lit and energy-efficient environment. >>> See more LED Lights: A Sustainable Lighting Solution for the Future at: https://www.pinterest.com/pin/934496991413980233/