Do you want to keep your outdoor lighting fixtures looking their best? Many homeowners forget about the importance of maintaining their landscape lighting. Outdoor lights not only add beauty to your home but also provide safety and a warm welcome. As you clean your windows and freshen up your home, don't forget to clean your outdoor lighting fixtures. It may not be the most glamorous task, but it's quick and easy, and you'll enjoy the benefits all season long.
Cleaning your outdoor light fixtures will enhance their beauty and improve the quality of light they emit. It doesn't require any special equipment, just a little bit of time and attention to detail. Follow these 20 tips on how to clean your landscape lighting effectively.
Check the Manufacturer's Instructions
Always refer to the manufacturer's instructions before you start cleaning. Take a look at the cleaning instructions provided in the manufacturer's booklet. If you can't find the booklet, check online or contact the manufacturer for guidance.
Read more: Is There a Night Mode for Apple Watch?
The Best 20 Tips to Clean Your Landscape Lighting
These steps apply to all outdoor light fixtures:
- Ensure the light is turned off and disconnect all power sources before removing fixtures or components.
- Use a sturdy ladder if you can't reach the light from the ground. Make sure the ladder is secure before starting.
- Most fixtures have removable components. Use the appropriate tools, usually a screwdriver, to remove globes, shields, or grills.
- Remove the light bulb and set all parts aside. Now you're ready to clean your landscape lighting.
- Fill two buckets with hot water and add some dish soap to one of them. Create suds for effective cleaning.
- Note: Avoid using chemical cleaners unless recommended by the manufacturer. They may leave a filmy residue or damage the glass or finish.
- Place the removed items (except light bulbs) in one bucket.
- Dip a rag or sponge into the soapy water and use it to wipe down the parts of the light fixture that you couldn't remove. Remove any bug carcasses or spider webs, ensuring water doesn't enter open sockets.
- Rinse the fixed and loosened pieces with clean water.
- Apply polish or wax to metal parts if desired. Clean glass or shades with glass cleaner.
- Wipe off light bulbs with a damp rag. Replace any burnt-out bulbs, being careful not to get the socket wet.
- For Nite Time Decor lighting, contact us if you need replacements. Our LED lights should last around 10 years.
- Reassemble your lighting fixtures, and you're done with your landscape lighting maintenance.
Tips for Cleaning Copper and Tiki Torch Lights
For copper light fixtures, start by checking the manufacturer's website for cleaning tips specific to the product. You can also use a variety of metal cleaners available in the market. One effective method is cutting a lemon in half, dipping it in salt, and scrubbing the copper fixtures. The acid in the lemon loosens tarnish, and the salt helps scrub it away. Afterward, wipe off the lemon juice and salt with a damp rag and apply copper polish if necessary.
When it comes to tiki torch lights, ensure there are no combustible items nearby before cleaning. For Nite Time Decor tiki lamps, clean the torch head with mild soap and warm water. This will remove any carbon build-up and keep your tiki torch lights in good condition.
Read more: How to Install LED Rock Lights
Other Maintenance Tips
While you're cleaning your outdoor lights, it's a great opportunity to perform a visual check and identify other potential issues. Consider the following:
- Check all the lights to ensure they work. Tighten loose bulbs or replace burnt-out ones.
- Examine the surrounding area of your lights, especially ground or garden lighting. Trim back any overgrown bushes or greenery that may block or cast shadows. Remove any fallen branches or limbs that need tidying up. Adjust the lighting if necessary.
- Inspect the wiring and cords for any damage caused by weather, rodents, or pets. Repair any damage you find.
- Evaluate your fixtures and consider upgrading or changing them if necessary. Sometimes, builders install fixtures that are too small or problematic to maintain. It may be time to invest in more suitable options.
- For a more comprehensive list of maintenance tips, check out our article on the Fall and Winter Landscape Lighting Maintenance Checklist.
Install the Best Landscape Lighting
Investing in high-quality lighting fixtures is an excellent way to reduce maintenance and save time and money. Sturdy fixtures will withstand wear and tear better. Consult with the experts at Nite Time Decor Oakville to find the highest quality lighting available.
Read more: Technical Support
Plan Outdoor Lighting with Care
As the weather gets warmer, you may want to adjust your Nite Time Decor landscape lighting fixtures. Winter designs may not complement spring or summer, so it's an ideal time for a tweak. Make your landscape lights highlight the beauty of your surroundings. Consider using plants, trees, and water features to enhance your outdoor lighting. Reach out to a Nite Time Decor Oakville specialist for guidance on creating a stunning outdoor lighting display.
Surprise your neighbors with gorgeous outdoor lighting services. Get a complimentary consultation from Nite Time Decor today and see the difference it makes!
Read more: How To Use Layers In Affinity Photo
We Are Always Available to Help!
If you have any questions or are unsure about any part of the landscape lighting cleaning process, feel free to contact us. Our Nite Time Decor associates are always ready to assist you.
Follow for more: Lynn Delagarza