Are you in need of pool parts? Look no further! Introducing Inyo's exciting new web series, "Pool Repair at the Pool." Join us as we step out of the studio and meet real pool owners to investigate, repair, and install anything pool-related.

In our first episode, we assist Lou in replacing his Pentair Amerilite with a stunning LED Pureline PureColors light. The essential steps for installing a pool light are as follows:

  1. Cut the power cable at the light fixture end.
  2. Attach the old light cable to the new cable and thread it through the conduit.
  3. Connect the new light to the power source.

However, as you know, anything related to pools is never that simple. Let's watch the video, and below, we'll outline the steps so you can follow along.

Read more: Our LED strip lights are versatile, catering to a myriad of applications

 

Step 1 - Choose the Right Replacement Light

After deciding to upgrade your standard white pool light to a color-changing LED, the next step is to determine which LED will fit your light niche and cable length.

Most pool light bulbs are a standard size, around 10.12 inches in diameter, making LED light fixtures like the Pentair Intellibrite, Hayward Colorlogic, and Pureline PureColors easy replacements. If you don't have the original light to measure or simply want to ensure you get the right one, feel free to reach out to us.

You will also need to measure the length of the electrical cable for installation. To ensure you don't come up short when installing the new light, please measure the following:

  • Distance from the pool light niche to the power source
  • Upward movement of the pool light to the power source
  • Add five to eight feet to allow for pulling the light onto the deck for future maintenance

In our installation, we replaced a Pentair Amerilite with the precise replacement, the Pureline PureColors.

Read more: 7 Effective Solutions for Resolving the Yeelight Only Red Light Problem

Step 2 - Turn Off Power, Cut Cable to Old Fixture

Secure your lighting circuit by turning off the old light switch before removing the old light from the niche and cutting the power cable just behind the light fixture.

Step 3 - Prepare the Niche and Conduit for New Cable Installation

To thread the cable through the conduit, we need to remove the waterproof seal connecting it to the niche. The most common methods of sealing the niche are epoxy and rubber cord stoppers.

For this installation, the original cable was sealed with epoxy. Remove the epoxy using needle-nose pliers and a flat screwdriver. For time-saving purposes, we hope your light has a rubber cord stopper, as they can be easily removed and reused. We will use a cord stopper when installing the new LED.

Read more: Red LED Strip Lights: Illuminating Excellence with Low Wattage

 

Step 4 - Tie, Tape, or Connect the New and Old Cables Together

By taping the new cable to the old cable before pulling it out, we complete two steps in one. We remove the old cable while also reinstalling the new light cable. Be sure to use heavy-duty tape when intertwining and taping the two cables together.

Step 5 - Pull the Old Cable Through

Get a good grip and start pulling the old cable through the conduit. If your cable is stubborn, use a silicone spray lubricant for easier maneuverability.

In our installation, the cables became detached, so we used fishing line to pull the new cable. Before cutting the cable, ensure you have five to eight feet of cable at the fixture end, allowing you to pull the light onto the deck for future maintenance.

Step 6 - Install the Light in the Niche

Tighten the retaining screw to secure the light in the niche.

Step 7 - Wiring an LED Pool Light

The wiring for LED pool lights should be similar to your original light, but always follow the wiring instructions provided in the owner's manual to ensure correctness.

Step 8 - Enjoy Your New Light

Thank you for joining us in our first Pool Repair episode. Stay tuned for our next episode where we install a DE filter.

FAQs:

Question 1: Can I use any LED light as a replacement for my pool light?
Answer: No, not all LED lights will be suitable replacements. You must measure the specifications of your current light and choose the appropriate LED light that will fit in the niche and cable.

Question 2: How long should the cable be for the new light installation?
Answer: It's important to measure the distance from the pool light niche to the power source, as well as the upward movement of the light. Then, add five to eight feet for future maintenance.

Question 3: What should I do if the cable gets stuck during installation?
Answer: If the cable gets stuck, you can use a spray oil lubricant to make it slippery and easier to pull through the conduit.

Question 4: Can I wire an LED light myself?
Answer: Yes, but it's important to follow the wiring instructions in the manual to ensure proper installation. If you're unsure, consult a professional electrician.

Question 5: What is the best light for pools?
Answer: The best light for pools will depend on your personal preferences and needs. LED lights are usually energy-efficient and offer various color options. Consult an expert to choose the right light for your pool.